(888) 265-1777 lakeshoreind@lsol.net

   CUSTOM CAGE GAS CYLINDER CAGE MODEL C-2MFW

GAS CYLINDER CAGE, CYLINDER RACK, LIFTING CAGE, COMPRESSED GAS CAGE, MATERIAL LIFT, CRANE BOTTLE LIFT, OXYGEN LIFT RACK

C-2 MFW GAS CYLINDER CAGE
Dimensions: 29” x 15” x 72” high *Working load limit 500 lbs.
*Holds 2 cylinders

 SPECIFICATIONS:

  • Designed to meet or exceed all State and Federal OSHA Regulations.
  • AWS D1.1 Certified Welding procedures, all welds are spatter free and smooth.
  • Each Custom Cage is load tested.
  • Inspection and load test certification supplied.
  • Two year warranty.
  • Dimensions:  29” x 15” x 72” high outside.
  • Working load limit 500 lbs.
  • Holds 2 cylinders
  • 1 1/2″ square tubing design.
  • Floor – non slip diamond plate.
  • E-track strapping to secure cylinders
  • Marinite Fire wall in center of cage to separate gas and oxygen complies with OSHA 29 CFR – 1926.350(a)(10).
  • Outward swinging gate on one side with drop pin latch.
  • Ramp below gate for easy loading of your cylinders.
  • Solid steel roof with a Single pick point
  • Finish –  Electrostatic powder coat finish – safety green.
  • Safety warning decals and permanent non corrosive ID plate.
  • Fully covered by product liability insurance.

Custom Cage Gas Cylinder Cage Model C-4FE MFW

SPECIFICATIONS: 

  • Designed to meet or exceed all State and Federal OSHA Regulations.
  • AWS D1.1 Certified Welding procedures, all welds are spatter free and smooth.
  • Each Custom Cage is load tested. * Inspection and load test certification supplied.
  • Two year warranty.
  • Dimensions: 52” x 16” x 72” high outside.
  • Working load limit 1,000 lbs.
  • Holds 4 cylinders
  • 2″ square tubing design.
  • Sides enclosed with #9 expanded metal.
  • Floor – non slip diamond plate.
  • CS85 Marinite Fire wall in center of cage to separate gas and oxygen complies with OSHA 29 CFR – 1926.350(a)(10).
  • Cylinders are secure with ratchet strapping
  • Solid steel roof with a Single pick point.
  • Outward swinging lockable gate on one side with drop pin latch.
  • Finish – Electrostatic powder coat finish – safety green.
  • Safety warning decals and permanent non corrosive ID plate.
  • Fully covered by product liability insurance.

Custom Cage Gas Cylinder Cage Model C-6FE

SPECIFICATIONS:

C-6 FE GAS CYLINDER CAGE

C-6 FE GAS CYLINDER CAGE

  • Designed to meet or exceed all State and Federal OSHA Regulations.
  • AWS D1.1 Certified Welding procedures, all welds are spatter free and smooth.
  • Each Custom Cage is load tested.
  • Inspection and load test certification supplied.
  • Two year warranty.
  • Dimensions:  34” x 34” x 72” high outside.
  • Working load limit 1,250 lbs.
  • Holds 6 cylinders
  • 2″ square tubing design.
  • Sides enclosed with #9 expanded metal.
  • Floor – non slip diamond plate.
  • E-track strapping to secure cylinders
  • Solid steel roof with a Single pick point.
  • Fork lift tubes 3″x6″x1/8”.
  • Outward swinging lockable gate on one side with drop pin latch.
  • Ramp below gate for easy loading of your cylinders.
  • Finish –  Electrostatic powder coat finish – safety green.
  • Safety warning decals and permanent non corrosive ID plate.
  • Fully covered by product liability insurance.

CFE-9

Safely stores 9 cylinders.  Sides fully enclosed with expanded metal, Solid steel roof with a single pick point. Comes with E-track strapping to secure cylinders. Can be lifted with crane or forklift.


CFE-12

Safely stores 12 cylinders.  Sides fully enclosed with expanded metal, Solid steel roof with a single pick point. Comes with E-track strapping to secure cylinders. Can be lifted with crane or forklift.


CUSTOM CAGE C-12FE GAS CYLINDER CAGE

SPECIFICATIONS

C-12-FE

C-12FE GAS CYLINDER CAGE

  • Designed to meet or exceed all State and Federal OSHA Regulations.
  • AWS D1.1 Certified Welding procedures, all welds are spatter free and smooth.
  • Each Custom Cage is load tested.
  • Inspection and load test certification supplied.
  • Two year warranty.
  • Dimensions:  44” x 34” x 75” high outside.
  • Working load limit 2,500 lbs.
  • Holds 12 cylinders
  • 2″ square tubing design.
  • Sides enclosed with #9 expanded metal.
  • Floor – non slip diamond plate.
  • E-track strapping to secure cylinders
  • Solid steel roof with a Single pick point.
  • Fork lift tubes 3″x6″x1/8” – 34” apart outside.
  • Outward swinging lockable gate on one side with drop pin latch.
  • Ramp below gate for easy loading & unloading cylinders.
  • Finish –  Electrostatic powder coat finish – Forest Green.
  • Safety warning decals and permanent non corrosive ID plate.
  • Fully covered by product liability insurance.
  • C-12FE Gas Cylinder Cage PDF

CFE-20

Safely stores 20 cylinders.  Sides fully enclosed with expanded metal, Solid steel roof with a single pick point.  Comes with E-track strapping to secure cylinders. Can be lifted with crane or forklift.


C-8 MFW

Square tube design, comes with CS85 Marinite Fire wall in center of cage to separate gas and oxygen complies with OSHA 29 CFR- 1926.350(a)(10). Outward swinging lockable gate on both ends. Can be lifted with crane or forklift.  Safely stores 8 cylinders.   Also available fully enclosed.


C-12 MFW

Square tube design, comes with CS85 Marinite Fire wall in center of cage to separate gas and oxygen complies with OSHA 29 CFR- 1926.350(a)(10). Outward swinging lockable gate on both ends. Can be lifted with crane or forklift.  Safely stores 12 cylinders.  Also available fully enclosed.


C-20 MFW

Square tube design, comes with CS85 Marinite Fire wall in center of cage to separate gas and oxygen complies with OSHA 29 CFR- 1926.350(a)(10). Outward swinging lockable gate on both ends. Can be lifted with crane or forklift.  Safely stores 20 cylinders.  Also available fully enclosed.


CUSTOM CAGE C-624 GAS CYLINDER CAGE

SPECIFICATIONS

  • C-624

    C-624 GAS CYLINDER CAGE

    Designed to meet or exceed all State and Federal OSHA Regulations.

  • AWS D1.1 Certified Welding procedures, all welds are spatter free and smooth.
  • Each Custom Cage is load tested.
  • Inspection and load test certification supplied.
  • Two year warranty.
  • Dimensions:  26” x 46” x 72” high.
  • Working load limit 1,500 lbs.
  • Holds 8 – 9” diameter cylinders
  • 1 1/2″ square tubing design.
  • 6” Steel continuous toe plate.
  • CS85 Marinite Fire wall in center of cage to separate gas and oxygen complies with OSHA 29 CFR -1926.350(a)(10).
  • The only marinite fire wall that has been tested to a 30 minute burn through time at temperature of 1600 degrees. Third party documentation papers of proof test are available.
  • Floor – non slip diamond plate.
  • Ratchet straps to secure cylinders
  • 4 lifting eyes for bridle suspension.
  • Fork lift tubes 3″x6″ – 38″ outside.
  • Outward swinging gates on both ends with drop pin latch.
  • Finish –  Electrostatic powder coat finish – Forest Green.
  • Safety warning decals and permanent non corrosive ID plate.
  • Fully covered by product liability insurance.
  • C-624 Gas Cylinder Cage PDF

CUSTOM CAGE C-624M GAS CYLINDER CAGE

SPECIFICATIONS

  • C-624M

    C-624M GAS CYLINDER CAGE

    Designed to meet or exceed all State and Federal OSHA Regulations.

  • AWS D1.1 Certified Welding procedures, all welds are spatter free and smooth.
  • Each Custom Cage is load tested.
  • Inspection and load test certification supplied.
  • Two year warranty.
  • Dimensions:  28” x 54” x 72” high. (Outside dim.)
  • Working load limit 2,500 lbs.
  • Holds 8 cylinders
  • 2″ square tubing design.
  • 6” Steel continuous toe plate.
  • Floor – non slip diamond plate.
  • Ratchet straps to secure cylinders
  • Single pick point.
  • Fork lift tubes 3″x6″ – 38″ outside.
  • Outward swinging gates one both ends with drop pin latch.
  • Finish –  Electrostatic powder coat finish – Forest Green.
  • Safety warning decals and permanent non corrosive ID plate.
  • Fully covered by product liability insurance.
  • C-624M Gas Cylinder Cage PDF